To Install Clipping clever is really easy just follow these step by step instructions:
- Prepare Surface for Rail installation (For installations using the tape clean surface with the wipe)
- Level up and mark a point where the Rail is to be installed*
- Apply the correct fixings relevant to the surface that the rail is being mounted on (If using tape for installation then apply tape to the rail*)
- Mount rail to the Surface
- Insert screw through clip and attach square back nut
- Slide clip onto the rail and tighten once you are happy with the position
- Repeat steps 5 and 6 until you have completed the pipe clip installation
- Insert End caps and Screw caps
We know every installation is different so use this as guide for you to find whatever way your happy with to install your clips on the Clipping clever rail.
*Please note the Clipping Clever rail is a Pipe fixing solution and is not designed to carry heavy weight i.e Boilers, radiators etc.
*Please note the tape and wipe is a time saving solution for flat clean surfaces i.e Tiles, Plasterboard etc. Please ensure full bonding takes place, if you are uncertain we recommend secondary fixing.